Sway Bar Kit With Bushings Front (SB016) And Rear (SB033)

BMR's suspensions SB037 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!For 2012 ZL1, use BMR part number SB039 due to electric power steering rack.FRONT Hole 1 (Boot-Leg end of bracket) 98% stiffer than OE bar Hole 2 (Center) 146% stiffer than OE bar Hole 3 (Flat end of bracket) 214% stiffer than OE bar REAR OE SS bar (FE4)-Hole number 1 provides just over 100% increase in rate over the factory FE4 bar-Hole number 2 is 150%-Hole number 3 is 200%OE ZL1 bar (FE5)-Hole number 1 provides just over 25% increase in rate over the factory FE4 bar-Hole number 2 is 40%-Hole number 3 is 75%FITMENT NOTE: SB033 IS DESIGNED AS A DIRECT REPLACEMENT FOR FE4 REAR suspensionsYSTEMS, WHERE THE SWAY BAR END LINKS ARE LOCATED OUTBOARD OF THE REAR SHOCKS. THIS INCLUDES 2012+ ZL1 AND 2013+ SS. 2010-2012 SS MAY UPGRADE TO THIS FE4 BAR IF REAR LOWER CONTROL ARMS AND REAR SWAY BAR END LINKS ARE UPGRADED TO FE4 SPEC. SB033 WILL NOT FIT ON V6 APPLICATION DUE TO INTERFERENCE WITH REAR V6 BRAKE CALIPERS.

Attributes:

• Brand Name: BMR Suspension
• GTIN: 00887753326201
• Front Sway Bar Adjustable: 3-position
• Front Sway Bar Diameter (in): 1.125 inches
• Front Sway Bar Diameter (mm): 29.0 mm
• Front Sway Bar Type: Hollow
• Mounting Hardware Included: Yes
• Position: Front and rear
• Quantity: Sold as a kit
• Rear Sway Bar Adjustable: 3-position
• Rear Sway Bar Diameter (in): 1.25 inches
• Rear Sway Bar Diameter (mm): 32.0 mm
• Rear Sway Bar Type: Hollow
• Sway Bar Finish: Red powdercoated
• Sway Bar Material: Steel

Extended Information:

• Country of Origin: United States
• Emissions : CARB Eligible

Packing Information:

• Quantity of Each: 1
• Package UOM: PK
• Dimension: 5 x 14 x 66 inches
• Weight: 31 POUNDS